Justin JM-LED Bright Strike 4, User Manual, Page: 4 / 4

On Board System
R 0 0 0
G000
B000
R 2 5 5
S O U 7
S O U 1
A U T 6
A U T 1 S P 1
S P Q
S 0
S Q
S O U D
G 2 5 5
B 2 5 5
A T F
1 0
O L 1
O L Q
5 [ H
1 4 [ H
H N D
Addr - DMX Address Setting via control board
1. Tap the MENU button and UP button or DOWN button until “Addr” is displayed, press ENTER.
2. “Axxx” will now be displayed, “x” represents the displayed address. Press the UP or DOWN buttons
to find your desired address.
Auto -This menu will let you select your desired auto mode
1. Tap the MENU button and UP button or DOWN button until “Auto” is displayed, press ENTER.
2. “Autx” will now be displayed, You can confirm six modes by UP or DOWN for auto mode.
Soun - This menu will let you select your desired sound mode
1. Tap the MENU button until “Soun” is displayed, press ENTER.
2. “Soux” will now be displayed, you can confirm seven modes by UP or DOWN for sound mode.
Colo - This menu will let you select your desired colour mode
1. Tap the MENU button and UP button or DOWN button until “CoLo” is displayed, press ENTER.
2. Either “CoL X”, “X” representing a number between 1-9 or “AtF” will be displayed. Press the
UP or DOWN buttons to select either a static color or “AtF” mode. If you select a static color press
ENTER and it will be confirmed. “AtF” Make your own color by mixing and adjusting the red, blue and
green manually. Select “AtF”, press ENTER,“Rxxx” “Gxxx” or “Bxxx” will be displayed. then you can
adjust it between 0-255, press ENTER ,you can select other color by UP or DOWN to adjust it.
Chnd- This menu will let you select the channel
1. Tap the MENU button until “Chnd ” is displayed, press ENTER.
2.Press UP or DOWN to select the channel
SLav- This menu will let you select your desired Master/slave mode
1. Tap the MENU button until “SLav” is displayed, press ENTER.
2. “Sla ” will now be displayed, Slave mode is confirmed. It will be slaved by auto mode sound mode
and chase mode
uer-This will display the software version
1. Press the UP or DOWN button until "uer" is dispalyed, press ENTER.
2. The software version will be displayed.
4 3