Justime 6765-XF-80CP, Installation Instructions Manual, Page: 4 / 12

INSTALLATION NOTE
安裝注意事項
! CAUTION : Please read the following point carefully before
Installation.
1. Keep the
Valve Body
faces horizontal and parallel to the wall that
will be finished.
2. Connect hot and cold supply pipes to the Valve Body , and keep
the distance from center of
Valve Bady
to
Finished Wall
between 2"(5.1cm) minimum and 3"(7.6cm) maximum.
! CAUTION : Prevent the risk of product damage.
1. When finished installation, turn the valve on and run water for 1
minute to remove any debris before using.
! 注意：安裝前，請詳閱下列注意事項。
1. 本產品安裝固定閥體於牆壁內側時，閥體需與牆壁保持平行。
2. 進水管中心與最終完成牆面的距離須保持在最小2"(5.1cm)到最大
3"(7.6cm)之間。
! 注意：為增加產品使用壽命，請依說明清潔供水管路。
1. 完成安裝後，需在使用前先把供水開關全開排水持續一分鐘，去
除雜質，以保持管路清潔。
Finished Wall
最終完成牆面
2"(5.1cm)MIN
3"(7.6cm)MAX
Water supplier
進水端
Water outlet
出水端