7
ADSL2+ Router
If you have a PSTN telephone line (normal analog line) Connect the router as shown below:
1. Connect the supplied RJ45 Ethernet cable from your PC's Ethernet port to ADSL2+ Router's
“
LAN
” Port.
2. Connect the supplied RJ11 telephone cable from your home's telephone jack to the “
LINE
”
port of the supplied ATF085A1R splitter. Connect the other supplied RJ11 telephone cable to
the “
MODEM
” port of the splitter and connect the other end of this cable to the “
LINE
” port of
your ADSL2+ Router.
3. Connect a RJ11 telephone cable to the “
PHONE
” port of the splitter and connect the other end
to your telephone.
4. Connect the power adapter to the power inlet
“POWER”
of the ADSL2+ Router and turn the
“
ON/OFF SWITCH”
switch of your ADSL2+ Router on.
Summary of Contents for JDR840V3
Page 1: ...User Manual ADSL2 Router...
