0845 1204582
www.justkampers.com
JK part numbers:
J13641 and J13642
OEM part number:
Not applicable
Just Kampers, Unit 1 Stapeley Manor, Long Lane, Odiham, Hants. RG29 1JE
NB. Please note that whilst every attempt is made to ensure that these instructions are as
accurate and clear as possible, we cannot be held responsible for misinterpretation of these
instructions or for any subsequent accident or damage caused through mis-fitted parts.
Tech Sheet
Spot Colour Pantone 653
Spot Colour P653/P151
Spot Colour White out
4 Colour Blue
4 Colour White out
4 Colour Blue/Orange
Black
White
Spot Colours
Process Colours
Page 4 of 5
Step Seven
Next to fit is the roof condensation sheet, this clips to
the ceiling and helps to protect the occupants from any
overnight condensation that may form.
The plastic clips fasten in the centre of the frame and in
each corner.
7. Clip the roof condensation sheet onto the frame
Step Eight
Once the condensation sheet is in, the next is to fit the
inner tent.
The top of the inner tent clips to the ceiling in the same
way as the condensation sheet.
The bottom of the inner tent has four hooks which hook
onto four loops on the ground sheet.
8. Clip inner tent to frame and hook onto ground sheet
Step Nine
To attach the awning to the vehicle, slide the gutter rail
(j) through the sleeve in the awning material and then
place the 3 clamps (b) along the length of the rail.
This rail then sits in the vehicles gutter and the clamps
are fitted to the vehicle as shown.
9. Slide gutter rail through the sleeve
and fit 3 clamps to vehicle gutter
Step Ten
Finally, you can convert the side panel to a sun canopy
simply by adding the two sun canopy poles (i) and
spare guy ropes.
This will provide you with a sun shade.
NOTE: This should only be used in calm, dry conditions!
10. Convert the side panel to a sun canopy using poles
(j)
(b)
(i)
(i)
