background image

11

IMPRESSA Z5 – Quick Reference Guide

To ensure that the Cappuccino Frother works perfectly, you should 
clean it 

daily

 when you have been preparing milk.

If the wrong cleaning agent is used, the machine could be damaged 
and/or traces of detergent could be left behind in the water.

Use only original JURA care products.

The IMPRESSA will not prompt you to clean the Cappuccino 
Frother.
The JURA Cappuccino Cleaner is available from stockists.

Precondition

COFFEE READY

 is shown on the display.

 k T

 Keep the Rotary Switch pressed 

until

 

MAINTENANCE

 

 appears.

 k T

 Press the Rotary Switch to enter the programme item.

CAPPUCCINO CLEANING

 k T

 Press the Rotary Switch.

CLEANER

  

FOR

  

CAPPUCCINO

 / 

PRESS

  

BUTTON

Pour 250 ml of fresh water into a container and add one 
 capful (max. 15 ml) of Cappuccino Cleaner.
Immerse the milk pipe in the receptacle.
Turn the selection lever to the milk foam position 

p

 or 

milk 

t

.

Place another receptacle under the Cappuccino Frother.

 c T

 Press the maintenance button.

CAPPUCCINO

 

CLEANING

, the Frother and pipe are 

cleaned.

WATER FOR CAPPUCCINO

 / 

PRESS BUTTON

Rinse the receptacle thoroughly, fill it with approx. 250 ml 
of fresh water and immerse the milk pipe in the water.
Empty the receptacle and place it under the Frother once 
more.

 c T

 Press the maintenance button.

CAPPUCCINO

 

CLEANING

, the Frother and pipe are 

rinsed with fresh water.

COFFEE READY

 appears on the display. Your IMPRESSA 

is once more ready to use.

T

E

E

T

T
T

T

T

T

Cleaning the 
Cappuccino Frother

Cleaning the 
Cappuccino Frother

CAUTION

CAUTION

Summary of Contents for The IMPRESSA Z5 - Generation II













Reviews: