User Manual MDB- Interface
- 11 -
3. Before you start
Warning:
If the position of the jumper does not fit to your coffee machine, the coffee machine can be dam-
aged.
The MDB-Interface is set for new IMPRESSA models as standard. If you use the MDB-Interface with an
IMPRESSA X95 or an IMPRESSA X90, the jumper inside the MDB-Box has to be plugged manually in
a different position (cp. fig. 1 to fig. 5).
Please follow the below-mentioned steps to change the position of the jumper:
Abb. 3: Open the MDB-Interface
§
Remove the four screws with a
screwdriver.
Abb. 4:
Abb. 5:
All new models
IMPRESSA X95/X90
§
Plug the black jumper, according
to your coffee machine, to the
corresponding aglets.
4. Commissioning of the hardware
Please follow the below-mentioned steps to put the system into operation (cp. fig. 2):
§
Connect the MDB-Interface with the provided cable (fig. 1/d).
§
Attach the desired billing system, respectively the coin checker to the MDB-Interface.
§
Connect the coffee machine to the mains supply.
§
Connect the MDB-Interface to the mains supply.
§
The MDB-Interface initialise itself automatically (duration approx. 10 seconds)
§
Start your coffee machine – your IMPRESSA is now in billing mode.