4
IMPRESSA Z7 – Quick Reference Guide
Precondition:
COFFEE READY
/
FILTER CHANGE
is dis-
played and the Maintenance button
c
lights up.
c
T
Press the Maintenance button.
CHANGE
TIME 20 MIN
/
START YES
If you do not want to start changing the filter just yet, turn the
E
Rotary Switch until
CHANGE
/
START NO
is displayed. Press
the Rotary Switch to exit the maintenance programme. The
prompt to change the filter remains active.
c
T
Press the Maintenance button.
CHANGE FILTER
/
PRESS BUTTON
T
Remove and empty the water tank.
T
Open the filter holder and remove the old CLARIS Blue filter
cartridge and extension piece.
T
Fit the filter extension on top of a new filter cartridge.
T
Insert the filter cartridge into the water tank, exerting slight
pressure.
T
Close the filter holder. It will click into place audibly.
T
Fill the water tank with fresh, cold water and reinsert the
tank.
T
Place a receptacle (at least 500 ml) under the cappuccino
frother.
T
Turn the setting wheel of the cappuccino frother to the
steam position
n
.
c
T
Press the Maintenance button.
FILTER RINS.
, water flows out of the frother.
You can interrupt rinsing of the filter at any time by pressing
E
any button. Press the Maintenance button
c
to continue rins-
ing of the filter.
The water may be slightly discoloured. This is not harmful to
E
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately 500 ml.
The IMPRESSA heats up and is once more ready for use.
