23
When using the de-scaling agent, immediately remove any
splashes or drips from sensitive surfaces, i.e. natural stone
and wooden surfaces, or take appropriate precautions.
In any case wait until the de-scaling agent is used up and the
tank is empty. Never refill de-scaling agent.
MACHINE CALCIFIED / MACHINE READY
Remove hot water nozzle/2-stage frothing jet.
Touch the
symbol (7).
EMPTY
TRAY
Empty the tray (Fig. 18/19).
NO
TRAY
Insert the tray (20) again.
AGENT
IN TANK
Completely dissolve the content of one blister (3 tablets) in a jug
containing 0.6 litres of water, and fill the mixture in the water tank.
Reinstall the water tank.
OPEN TAP
AGENT
IN TANK
Put a sufficiently large container under the replaceable hot water
nozzle (16).
Open the steam / hot water draw-off valve (14) (Fig. 12).
DE-SCALING
CLOSE TAP
Close the steam / hot water draw-off tap (14).
DE-SCALING
EMPTY
TRAY
Empty the tray (Fig. 18/19).
NO
TRAY
Insert the tray (20) again.
FILL
WATER
Rinse the water tank thoroughly and fill it with cold, fresh
tap water. Install it again.
OPEN
TAP
Open the steam / hot water draw-off tap (14) (Fig. 12).
DE-SCALING
CLOSE TAP
After you have closed the steam / hot water draw off tap (14),
the following message is displayed
DE-SCALING
EMPTY
TRAY
Empty the tray (Fig. 18/19).
NO
TRAY
Insert the tray (20) again.
PRESS
MAINT.
Touch the
symbol (7).
RINSING
READY
The de-scaling operation was completed successfully.
E
