Jura IMPRESSA X9 Win, Manual

Page: 25 / 52

25
5 Permanent settings in programming mode
With the PRODUCT SETTINGS programme item you can select indi-
vidual settings for all coffee and milk specialities as well as hot
water.
The following permanent settings can be made:
Settings in programming mode always follow the same model.
Example : Proceed as follows to change the powder amount for
1 espresso.
Precondition : Your IMPRESSA is ready for operation.
T
Open the cover of the programming buttons.
O T
Press the P button until WATER HARDNESS appears.
T
Press the + or - button several times until PRODUCT
SETTINGS is shown.
O T
Press the P button to enter the programme item.
SELECT PRODUCT
T
Press the 1 espresso button.
1 ESPRESSO / WATER AMOUNT
T
Press the + button several times until 1 ESPRESSO / POWDER
AMOUNT is shown.
O T
Press the P button to enter the programme item.
POWDER AMOUNT
Product settings
5 Permanent settings in programming mode
Product Amount Additional setting options
1 espresso,
1 coffee,
2 coffees WATER AMOUNT: 25 ML – 300 ML
(with 2 coffees: amount per cup)
POWDER AMOUNT GRINDER (left and right grinder
in percent)
TEMPERATURE: LOW, NORMAL,
HIGH
Cappuccino, milky
coffee, latte macchi-
ato WATER AMOUNT: 25 ML – 300 ML
POWDER AMOUNT
MILK AMOUNT: 0 / 3 SEC – 120 SEC
MILK FOAM: 0 / 3 SEC – 120 SEC GRINDER (left and right grinder
in percent)
TEMPERATURE: LOW, NORMAL,
HIGH
Hot milk MILK AMOUNT: 0 / 3 SEC – 120 SEC –
Hot water (portion) WATER AMOUNT: 25 ML – 500 ML –
Steam (permanent) – –