13
16.3 Installation of an automatic filling device
Please read the operating instructions of the automatic filling
device.
16.4 Empty grounds container
The grounds container collects the coffee grounds.
:
EMPTY DRAWER
When this display lights up, no more draw-offs are possible and
the grounds container must be emptied.
Carefully remove the drip tray – there is water in it. Then re-
move the grounds container (Fig. 4).
16.5 Empty drip tray
:
EMPTY DRIP TRAY
When this display lights up, no more draw-offs are possible and
the drip tray must be emptied.
Carefully remove the drip tray – there is water in it (Fig. 4).
16.6 Grounds container missing
:
DRAWER MISSING
When this display lights up, the grounds container has not been
inserted properly or is missing.
16.7 Drip tray missing
:
DRIP TRAY MISSING
When this display lights up, the drip tray has not been inserted
properly.
16.8 Fill beans
:
FILL COFFEE BEANS
Fill with beans as described in Chapter 3.4.
The display FILL COFFEE BEANS goes off after a draw-off
of coffee.
We recommend that you clean the bean container out with a
dry cloth from time to time before filling. For this, switch the
machine
off.
16.9 Removing foreign objects
Switch your machine off with the ON/OFF
operating switch.
Remove the plug from the power socket.
Open the hinged door on the reverse of the machine (Fig. 5).
Press the slides downwards (Fig. 6) and remove the bean con-
tainer.
Remove any beans with a vacuum cleaner.
Position the spanner (Fig. 7).
Turn the spanner in an anti-clockwise direction until the foreign
object becomes loose.
Remove remaining powder with a vacuum cleaner.
Now replace the bean container and pull the slides to the front
before closing the door (Fig. 6).
16.10 Clean machine
: CLEANING NECESSARY
After 220 draw-offs or 180 rinsings, the machine has to be cleaned.
You can continue to draw off coffee and hot water/steam. We re-
commend that you clean the machine (Chapter 19) within the next
few days.
Carry out a cleaning (Chapter 19).
16.11 Machine scaled
: DECALCIFYING NECESSARY
The machine recognises the necessity of de-scaling. You can con-
tinue to draw off coffee or hot water/steam. We recommend that
you carry out the de-scaling (Chapter 20) within the next few days.
16.12 Clean contacts
: EMPTY DRIP TRAY / CLEAN CONTACTS
The de-scaling residue in the area of the contacts must be removed.
Please proceed as follows:
Rinse the contact fasteners in trough (B) (Fig. 8) as well as the
contacts (A) with hot water and washing-up liquid. Then ad-
ditionally clean the contact fasteners in trough (B) with a brush.
16.13 General cleaning instructions
Never use abrasive articles or corrosive chemicals to clean your
machine.
Wipe off the inside and outside of the casing with a soft, damp
cloth.
Clean the pivoting nozzle after every use.
After heating milk, draw off a little hot water, in order to clean
the pivoting nozzle from the inside.
The water tank must be rinsed and filled with fresh water every
day.
If you see any visible scaling in the water tank, you can
remove it with a customary de-scaling agent.
Remove the water tank in order to clean it.
16.14 Cleaning the coffee outlet
We recommend to disassemble and clean the dual spout if
you make milk products regularly.
a) Removing the coffee outlet
Switch off the machine by pressing the ON/OFF key
and
disconnect the machine from power supply.
Remove the coffee outlet cover (Fig. 25).
Open the lid of the coffee distributor (Fig. 26).
Pull out the coffee distributor towards the front and press the
milk frothing device out of the support from below (Fig. 27/28).
Remove the steam supply and milk supply hose from the milk
frothing device (Fig. 29/30).
Remove the metal adapter of the milk suction hose (Fig. 31).
Open the milk supply door on the left side of the machine.
Remove the unlocking device of the support of the outlet head
(Fig. 32).
Pull off the support of the outlet head (to the front) (Fig. 33).
Remove the coffee supply hose from the coupling piece
(Fig. 34).
b) Cleaning the milk frothing device
Dismantle the milk frothing device.
Clean the parts in hot water and using the corresponding brushes.
c) Cleaning the milk frothing hose
Separate the milk suction hose in the middle.
Clean the milk suction hose and the connecting element using
the brush.
d) Cleaning the coffee distributor
Clean the coffee distributor and the coffee outlet pipe in hot
water.
E
