8
flashes
lights up
If symbol flashes on the display (7), you need to fill up the
coffee beans, as described in Chapter 2.4. Then press a draw-
off key of your choice. The mill will now fill up on coffee
beans.
To get an excellent froth, adjust the coffee spout (15) to the
size of your cup (Fig. 3).
4. Setting the water hardness
Your IMPRESSA E10/20/25 heats up water. As a result, cal-
cification occurs during normal use, and this is indicated
automatically. Before using the IMPRESSA E10/20/25 for
the first time, it needs to be set to the hardness of the water
used. Use the supplied test sticks for this.
1° German hardness is equivalent to 1.79° French hardness.
The water hardness programming function is no longer
displayed if the filter has been activated.
The IMPRESSA E10/20/25 has 6 hardness degrees to select
from which are displayed while you are setting the water
hardness on your machine.
Level to be selected when using the Claris plus filter cartridge
Level 0 water hardness deactivated, automatic calcification
display (7) deactivated.
Level 1 German water hardness range 1 – 7°,
French water hardness range 1.79° – 12.53°
,
Level 2 German water hardness range 8 – 15°,
French water hardness range 14.32° – 26.85°
, ,
Level 3 German water hardness range 16 – 23°,
French water hardness range 28.64° – 41.14°
, , ,
Level 4 German water hardness range 24 – 30°,
French water hardness range 42.96° – 53.7°
, , , ,
Your IMPRESSA E10/20/25 is preset to level 3. You can change
these settings. To do so, proceed as follows:
Your IMPRESSA E10/20/25 is
switched off.
Press draw-off key
until the following symbols appear:
, , ,
Select the required level by pressing draw-off key
.
To save the setting, press the ON/OFF
key.
You only need to set the water hardness before using your
machine for the first time or when using a different water
quality. The message disappears if no setting is entered with-
in 30 seconds. The setting saved last remains valid.
5. Installation of Claris plus filter cartridges
If the Claris plus filter cartridge is installed properly, de-scal-
ing of the coffee machine is no longer required. For more
information on the Claris plus filter cartridge refer to
brochure «Claris plus. Hard on limescale. Gentle on your
coffee machine.»
