background image

N) Decalcifying  

DESCALE MACHINE / MACHINE READY

For different water hardness levels see Operating Instructions.
If a water hardness level is selected, the decalcifying monitor
is active. 

Decalcify when above message appears.

Important:

If you use the Clearyl Filter and the above 

message appears, then the Clearyl Installation procedure
was not performed properly. See chapter K2 to K4 above.

Important:

The decalcifying program must not be interrupted.

• Use only the special decalcifying tablets (not the cleaning 

tablets!). For decalc tablet supply see below.

1. Push the 

RINSE

button; the display shows 

EMPTY 

DRAWER

.

2. Remove and empty drawer. You must remove the drawer 

for 20 seconds, even if it is empty. Replace complete 
drawer. 

Decalcifying Session:

3.

SOLVENT IN TANK

. Dissolve three large square tablets in 

16 oz. of water, remove tank and pour mixture into empty 
water tank and replace. 

4. Place a container (at least 16 oz.) underneath frother. 

SOLVENT IN TANK OPEN TAP

. Turn the 

SELECTOR

to 

the water symbol. 

DECAL ON

. After a few minutes: 

SHUT TAP

. Turn the 

SELECTOR

to  the cup symbol. 

DECAL ON

. After a few minutes 

EMPTY DRAWER

.

5. Carefully remove container and drawer, empty and 

replace.

Cleaning Session: 

6.

FILL WATER

. Rinse water tank and fill with cold water 

(16 oz.) and replace. Place a container under the frother. 

7.

OPEN TAP

. Turn the 

SELECTOR

to the water symbol. 

DECAL ON

. After a few minutes: 

SHUT TAP

. Turn the 

SELECTOR

to  the cup symbol. 

DECAL ON

. After a few 

minutes 

EMPTY DRAWER

. Carefully remove container 

and drawer, empty and replace.

8.

PRESS RINSE

. Push the 

RINSE

button. The machine 

returns to 

READY

and resets itself. 

CAPRESSO CUSTOMER  SERVICE 

1-800-220-5701

Monday – Thursday: 9AM – 9PM EST

Friday: 9AM – 8PM EST

Saturday: 9AM – 5PM EST

email: [email protected]

Fax: 201-767-9684

O) Supplies 

can be ordered through: 

Customer Service or Mail Order Form or www.capresso.com:
• Clearyl Water Filter Cartridge: #64553
• Special Cleaning Tablets: #62205
• Decalcifying Tablets: #61848
• Cappuccino Cleaner: #63801, removes milk fat from frother
• Grand Aroma Coffee Beans: #921, regular, decaf, espresso

64716R2/1006

Summary of Contents for impressa e

Page 1: ... into the cup and stops automatically SHUT TAP Turn the SELECTOR to the Cup Symbol SYSTEM FILLING HEATING After two minutes PRESS RINSE 4 Place a cup underneath the coffee spouts and push the RINSE button READY Place a large cup underneath the coffee spout and press the 1 CUP button The machine starts grinding and brews coffee Discard the first two cups READY You can only brew coffee when the disp...

Page 2: ...HUT TAP G Using Steam Frothing and Steaming Important Frother parts must be tightly connected and clean Cappuccino One shot espresso plus 4 oz of steamed and frothed milk Frother sleeve DOWN Latte One shot espresso plus 4 to 5 oz of steamed milk Frother sleeve UP steaming only no frothing 1 Push the STEAM button HEATING After 20 sec STEAM READY 2 Immerse the frother into a pitcher with milk and tu...

Page 3: ...the Clearyl Water Filter When display shows CHANGE FILTER MACHINE READY Remove old filter rinse new filter under running water and insert see above Place a large container 20 oz under the frother and push the RINSE button The DIAL illuminates Turn the DIAL until the display shows FILTER Push the DIAL the display shows REPLACE OPEN TAP Turn the SELECTOR to the water symbol FILTER RINSING See Chapte...

Page 4: ...OLVENT IN TANK OPEN TAP Turn the SELECTOR to the water symbol DECAL ON After a few minutes SHUT TAP Turn the SELECTOR to the cup symbol DECAL ON After a few minutes EMPTY DRAWER 5 Carefully remove container and drawer empty and replace Cleaning Session 6 FILL WATER Rinse water tank and fill with cold water 16 oz and replace Place a container under the frother 7 OPEN TAP Turn the SELECTOR to the wa...

Reviews: