background image

Important

: If you use the Clearyl Blue filter and 

DE-SCALE

appears, then the filter activation procedure was not 
performed properly, see "J) Installing Clearyl...".

Important

: Decalcifying program must not be interrupted.

Use only the special decalcifying tablets (not the cleaning
tablets!). For supplies see "N) Supplies".

DE-SCALE / READY

.

1. Push the Rinse button, display shows 

EMPTY TRAY

2.  Remove and empty the tray and the used coffee container

      and replace, display shows 

AGENT IN TANK

.

      Attention

: If the tray and the used coffee container are 

      empty, you must remove the tray for approx. 20 seconds 
      and then replace it. 

3.  Remove the frothXpress system from the Auto Cappuccino

      system.

4. Remove the water container and empty.
5. Completely dissolve 3 of the large square decalcifying 

      tablets in a container with 18 oz. of water (0.5 liters) and 
      pour the solution into the water tank. 

6. Replace water tank. 

AGENT IN TANK

. The 

Rinse

button 

      illuminates.

7. Place a large container under Auto Cappuccino system.
8. Push the Rinse button. The display shows 

DE-SCALING

      and the light in the Rinse button flashes during the 
      operation. The machine pumps the decalcifying solution 
      in intervals through the Cappuccino system. 

9. When display shows 

EMPTY TRAY

, remove and empty 

      the container. Then carefully remove and empty the tray 
      and the used coffee container and replace.

10. Display shows 

FILL WATER TANK

. Remove the water 

      tank, rinse thoroughly, fill it halfway with fresh water and 
      replace. The display shows 

PRESS RINSE

.

11. Place the container under the Auto Cappuccino system 

      and push the 

Rinse

button 

DE-SCALING

.

12. The machine pumps fresh water through the system and 

      stops automatically. The display shows 

EMPTY TRAY

13. Remove and empty the container. Then carefully remove 

      and empty the tray and the used coffee container and 
      replace. 

READY

.

14. Attach the frothXpress system to the steam nozzle.

      The machine will automatically remind you when it’s time 
      to decalcify again.

N) Supplies

can be ordered through:

Customer Service, Mail Order Form or www.capresso.com
• Clearyl Blue Water Filter: #67879
• Cleaning Tablets: #62205 
• Decalcifying Tablets: #61848

JURA-CAPRESSO CUSTOMER  SERVICE:
1-800-220-5701   

M-F 9AM - 9PM;  Sat. 9AM - 5PM EST

FAX: 201-767-9684 [email protected]

Summary of Contents for Impressa C9 One Touch







Reviews: