Impressa C9 One Touch Quick Reference Guide
This Guide does not replace the Operating Instructions.
For details and cautions you must read all instructions.
Traces of Coffee Grounds in New Machine?
This is normal! Grinder was tested during assembly with beans.
Despite cleaning, traces of ground coffee may be found.
RED TEXT
represents display text.
A) First Time Ever Preparation
1. Fill water in tank and beans in bean container.
2. DO NOT install the Clearyl Blue Filter now!
3. Push the main power switch in the back of the machine.
4. Push the
On/Off
button in the display. When the display
reads
PRESS RINSE
place a cup under the frothXpress
and push the
Rinse
button.
SYSTEM FILLING
, then
HEATING
, then
PRESS RINSE
.
5. Place a cup under the coffee spouts and press the
Rinse
button.
RINSING
, then
READY
.
6. Place a large cup underneath the coffee spouts and press
the
Coffee
button.
1 COFFEE
: The machine starts grinding
and brewing. Repeat once. Discard the first two cups of
coffee.
B) Daily Preparation
1. Fill fresh water in tank and check bean container.
2. Push
On/Off
button.
HEATING
.
PRESS RINSE
. Place
a cup under the coffee spouts and press the
Rinse
button.
RINSING
.
READY
.
Important:
You can only brew coffee when display shows
READY
.
C) Grinding and Brewing Coffee
Two pre-set coffee buttons:
ESPRESSO
,
COFFEE
. These
buttons are pre-set for strength (three settings), cup size
(1 to 8 oz. per cup) and temperature (HIGH, NORMAL).
In programming you can change all three functions.
To brew coffee:
Pre-warm cup, see "E) Using Hot Water"
68205R1
READY
1
2
7
6
5
4
3
8
1. On / Off Button
2. Rinse Button
3. Ground Coffee Button
4. On/Off Illumination
5. Coffee Button
6. Espresso Button
7. Display
8. Rotary Dial with Push Button
