background image

28

5 Maintenance

T

  Pour the solution into the empty water tank 

and insert it into the machine.

‘Press the menu button’

T

  Touch the Menu symbol 

t

.

‘Machine is being descaled’

, water flows out 

of the hot-water nozzle repeatedly.
The operation is interrupted, 

‘Empty drip 

tray’

.

T

  Empty the receptacle.

T

  Empty the drip tray and coffee grounds 

container and put them back into the 
machine.

‘Fill water tank’

T

  Place a receptacle under the dual spout and 

the hot-water spout.

T

  Remove the water tank and rinse it 

thoroughly.

T

  Fill the water tank with fresh, cold water and 

reinsert the tank.

‘Press the menu button’

T

  Touch the Menu symbol 

t

.

‘Machine is being descaled’

, water flows out 

of the dual and hot-water spout.

‘Machine is rinsing’

, water flows out of the 

dual spout.
The operation stops automatically, 

‘Empty 

drip tray’

.

T

  Empty the drip tray and coffee grounds 

container and put them back into the 
machine.
Descaling is now complete. Your IMPRESSA 
is once more ready for use.

 

E

If the descaling operation stops unexpect-
edly, rinse the water tank thoroughly.

9

Cleaning the bean container

Coffee beans may be covered with a slight oil film 
which remains on the walls of the bean container. 
These traces may negatively affect the coffee 
result. For this reason clean the bean container 
from time to time.

Precondition: 

‘Fill bean container’

 is displayed.

T

  Switch the machine off with the On/Off 

button 

Q

.

T

  Remove the aroma preservation cover.

T

  Clean the bean container with a soft, dry 

cloth.

T

  Fill the bean container with coffee beans and 

close the aroma preservation cover.

Descaling the water tank

Limescale deposits may form in the water tank.  
To ensure correct function of the machine, descale 
the water tank from time to time.

T

  Remove the water tank.

T

  If you use a CLEARYL Blue filter cartridge, 

remove this.

T

  Completely fill the water tank and dissolve  

3 JURA descaling tablets in it.

T

  Leave the water tank with the descaling  

solution for several hours (e.g. overnight).

T

  Empty the water tank and rinse it thor-

oughly.

T

  If you use a CLEARYL Blue filter cartridge, 

insert this again.

T

  Fill the water tank with fresh, cold water and 

reinsert the tank.

Summary of Contents for IMPRESSA A9 One Touch





































Reviews: