Services Unlimited, Inc./ Parts Guru
To connect the Teflon hose into the (Legris) fitting, you need to cut
the hose end straight across to ensure tight & even connection across
the hose end. (no O-rings used). Push tube in the fitting well inside to
connect. Pull tube to make sure that it is fixed correct and not pull out
Before connecting the wires, connect the hose to the diaphragm
regulator. Prefer to use a new regulator. Slide O-ring first on the hose
tip. Wet the O-ring with lube. Push the hose deep inside the
regulator and slide the hairpin clip behind the brass collar. Pull the
hose after inserting hairpin clip to make sure it locked the hose.
email: [email protected]
24 of 34
