Elektroapparate AG
Technical information
Technical Support
Language
EN
GIGA X7/X7c Professional
Author: Patrik Studer
Checked:
Approved:
Docu.-name:
Technische_Informationen_GIGA_X7_EN.doc
L:\Geräte\GIGA\Giga_X7\Schulungs_Unterlagen\E\Technisch
e_Informationen_GIGA_X7_EN.doc
Date:
Rev. A:
Rev. B:
Rev. C:
Rev. D:
Rev. E:
Rev. F:
18.11.2011
18.03.2012
12.09.2012
10.12.2012
21.05.2013
Page 17/19
15.3
Maintenance counter:
Number of maintenance programmes performed
One can read out the actual care status Cleaning/Descaling/Changing the filter/ etc
(with progress bar)
15.4
Version:
Read out the software versions
15.5
Prepare appliance for resale:
Procedure:
All products will be reset to factory settings and the fluid system is empty due to protection against frost.
The appliance asks the customer for the desired language and afterwards it will fill the system with water.
Initial position:
The appliance is fully working and if necessary, an exit diagnosis has been made with the animation system.
If the fluid system is already empty start with step 4
1.
Switch on appliance until the message in the display appears
PLEASE SELECT PRODUCT
2.
Go into the programming mode to
MACHINE SETTINGS 3/5 /FACTORY SETTINGS/EMPTY SYSTEM
3.
The appliance then switches off automatically
4.
Remove water tank
5.
Switch on again the appliance, display
FILL WATER TANK
6.
Press key combination
KEY 1
&
KEY 8
at the same time until the message shows up
SAVED
7.
Switch off appliance
