15
ENA 7
3 Daily
operation
Switching on the machine
When the ENA is switched on, a prompt to per-
form a rinse operation automatically appears.
Q
T
Press the On/Off button to switch the ENA on.
HEATING
PRESS ROTARY
T
Place a receptacle under the coffee spout.
k
T
Press the Rotary Switch to start the rinse.
RINSING
, the system rinses itself,
stopping automatically.
READY
Daily maintenance
To ensure that you get many years of reliable
service out of your ENA and to guarantee the
optimum coffee quality, the machine requires daily
maintenance.
T
Remove the drip tray.
T
Empty the coffee grounds container and
drip tray and rinse with warm water.
T
Reinsert the coffee grounds container and
the drip tray.
T
Rinse the water tank with clean water.
T
Dismantle and rinse the cappuccino frother
(see Chapter 5 ‘Maintenance – Rinsing the
cappuccino frother’).
T
Wipe the surface of the machine with a
clean, soft, damp cloth (e.g. microfibre
cloth).
Switching off the machine
When the ENA is switched off, the system is
automatically rinsed if a coffee speciality has been
prepared.
T
Place a receptacle under the coffee spout.
Q
T
Press the On/Off button.
RINSING
, the system rinses itself,
stopping automatically. The ENA is switched
off.
When the ENA is switched off with the
E
On/Off button, the machine consumes less
than 0.01 W of standby energy.
4 Permanent settings in
programming mode
Products
You can make the following permanent settings for
coffee specialities:
Amount of water:
U
25 ML
–
240 ML
(per cup)
Coffee strength (for 1 espresso and 1 coffee):
U
MILD
,
NORMAL
,
STRONG
Temperature:
U
NORMAL
,
HIGH
Permanent settings in programming mode always
follow the same model.
Example:
Permanently change the coffee strength
(
FLAVOUR
) for 1 coffee from
NORMAL
to
STRONG
.
Precondition:
READY
is displayed.
k
T
Press
and hold
the Rotary Switch until
RINSE
appears.
g
T
Turn the Rotary Switch until
PRODUCT
is
displayed.
k
T
Press the Rotary Switch to enter the
programme item.
SELECT BUTTON
Next select the button of the product for
E
which you would like to make settings. No
product is prepared at this point.
To change the setting for a double product,
E
press the corresponding button twice within
two seconds.
>
T
Press the Coffee button.
1 COFFEE
WATER
g
T
Turn the Rotary Switch until
FLAVOUR
is
displayed.
en
