7 Maintenance
55
de
en
7 Maintenance
Basic information about maintenance:
U
Touch
f
to enter the cockpit� This area consists of a ‘Mainten-
ance status’
c
section and a ‘Machine setting’
f
section� You
can manage the maintenance of your ENA in the
c
section�
U
The Cockpit shows maintenance programmes that need to be
carried out in the form of messages with red backgrounds�
Touch the corresponding message to go straight to the
maintenance programme� Maintenance programmes that are
due imminently are indicated on your ENA by means of a bar
display within the message�
U
Carry out each maintenance programme when you are
prompted to do so�
You can start coffee system rinsing manually at any time�
Precondition:
The start screen is displayed�
T
Place a receptacle under the dual spout�
T
Touch
f
�
T
Touch the ‘Maintenance’ symbol
c
�
T
Touch
‘Rinse the coffee system’
to start the rinse operation�
‘Machine is rinsing’
The rinse stops automatically� The start screen is displayed�
After each milk preparation, the ENA prompts you to perform a milk
system rinse�
In the machine settings, you can set whether the milk system rinsing
is to be initiated manually or automatically 15 minutes after prepar-
ation (see chapter 6 ‘Machine settings’)�
Precondition:
The start screen is displayed�
T
Place a receptacle under the dual spout�
T
Touch
f
�
T
Touch the ‘Maintenance’ symbol
c
�
T
Touch
‘Rinse the coffee system’
to start the rinse operation�
‘Milk system is being rinsed’
The rinse stops automatically� The start screen is displayed�
Rinsing the machine
Rinsing the milk system
