7 Maintenance
25
Once the filter cartridge stops working (depending on the water
hardness setting), the GIGA will prompt you to change the filter�
E
Your GIGA no longer has to be descaled if you are using the
CLARIS Smart filter cartridge�
E
CLARIS Smart filter cartridges are available from specialised
dealers�
Precondition:
The start screen is displayed� (Or
‘Change the filter’
is displayed in the Cockpit if the filter's capacity has been
exhausted�)
T
Remove and empty the water tank�
T
Open the filter holder and remove the old CLARIS Smart filter
cartridge along with the extension�
T
Fit the filter cartridge extension on top of a
new
CLARIS Smart
filter cartridge�
T
Insert the filter cartridge with its extension into the water tank�
T
Close the filter holder� It will click into place audibly�
T
Fill the water tank with fresh, cold water and reinsert the tank�
The machine automatically detects that you have just inserted/
changed the filter cartridge�
‘Filter is being rinsed’
, Water flows directly into the drip tray�
‘Empty drip tray’
/
‘Empty coffee grounds container’
T
Empty the drip tray and coffee grounds container and put them
back into the machine�
‘Filter operation’
The start screen is displayed�
After 180 preparations or 80 switch-on rinses, the GIGA will prompt
you to clean it�
If the wrong cleaning agent is used, the machine could be
damaged and/or traces could be left behind in the water�
T
Use only original JURA maintenance products�
E
The cleaning programme lasts approximately 20 minutes�
E
Do not interrupt the cleaning programme� The quality of
cleaning will be impaired if you do so�
E
JURA cleaning tablets are available from specialised dealers�
Precondition:
‘Clean’
is displayed in the Cockpit�
T
T
Fill the water tank
T
Touch
‘Clean’
�
Inserting/changing the filter
Cleaning the machine
CAUTION