3. Push Cappuccino button. Display shows
COFFEE 2.0 OZ
.
4. Push the Dial,
COFFEE 2.0 OZ
and turn until
display shows
COFFEE 4.0 OZ
.
5. Push Dial to confirm:
CONFIRMED
3
then
COFFEE 4.0 OZ
.
6. Turn the Dial until display shows
AROMA
and the
current strength setting of three beans.
7. Push the Dial,
NORMAL
and turn until display
shows
XSTRONG
with five beans.
8. Push Dial
CONFIRMED
3
then
XSTRONG
.
9. Turn the Dial until display shows
MILK 14 SEC
10. Push dial,
MILK 14 SEC
, and turn until display
shows
MILK 20 SEC
.
11. Push Dial:
CONFIRMED
3
then
MILK 20 SEC
.
12. Turn Dial until the display shows
EXIT
and push.
SELECT PRODUCT
.
13. If you do not want to change another button, turn
Dial until the display shows
EXIT
and push.
COFFEE READY
.
For more programming options see Instruction Book,
pages 24 through 29.
J) Installing the Clearyl Cartridge
• Rinse cartridge under running water. Snap the
extension rod onto the top of cartridge. Insert into
Water Tank reception, make sure tapered end fits
snugly inside the fins. Close cartridge holder.
• Fill tank with cold water and replace.
Activating the Clearyl Cartridge:
You must activate the cartridge for the machine to
monitor it properly. Otherwise the S9 OT assumes
decalcifying mode.
COFFEE READY
.
1. Push
Rotary Dial
. Display shows
MAINTENANCE
.
2. Turn Dial until display shows
FILTER NO
. Push Dial
to enter the program.
3. Turn Dial until
FILTER YES
and push to confirm.
CONFIRMED
3
then
INSERT FILTER/PRESS
STEAM
. The
Rinse
button illuminates.
4. Place a 20 oz. container under the frothXpress and
turn the frothXpress dial to the 3 o'clock position.
5. Push the
Rinse
button.
FILTER RINSING
. For the
next 60 seconds the machine will push water
through the cartridge and the frothXpress system.
Initially, the water may have a slight discoloration. The
program stops automatically.
COFFEE READY
.
6. Turn frothXpress dial back to your preferred setting.
Please note:
As long as the filter is activated, the
water hardness setting is automatically turned off.
