Note: -The WPS function can be configured only if the wireless function of the router is enabled. Also,
the WPS function is disabled if your wireless encryption is WEP. Please make sure the wireless
function is enabled and configured with the appropriate encryption before configuring the
WPS.
①
Press the WPS button on the Router.
②
Within two minutes, press the WPS button on your Range Extender.
2.3 Logging In to Your Range Extender
With a Web-based utility, it is easy to configure and manage the Range Extender.
The Web-based utility can be used on operating system such as Windows, MAC iOS
or UNIX with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or
Apple Safari.
Follow the steps below to log in to your
Range Extender
.
①
Open a Web browser
and enter
192.168.0.2
or
router.Juplink.com
*
(Only for Firmware v1.0.2)
in the address
bar.
②
Enter Username
admin
and Password
admin
,
then click Log in (You can modify
the login password in Page
Change the Login Password
).
Note: If the
Login
window does not appear, please refer to the
FAQ
Section.
