JA95-N11 Audio Controller - RX Mute - NVG
Installation and Operating Manual
Rev A
Page 2
1.3
Inputs and Outputs
for the mating connector designators and pin assignments for the
input and output signals.
1.3.1
Inputs
Name
Qty
Type
ALERT ENABLE
1
Active high discrete
ALERT KEY
3
Active low discrete (selected via ProCS)
CALL
1
Active low discrete (selected via ProCS)
CONFIG DATA TO JA95
1
Data signal
DIRECT AUDIO
1
Audio signal
FRONT PANEL MUSIC L/R
2
Audio signal
LIGHTS INPUT
1
Analog control signal
MIC
7
Audio signal
MODE SELECT / CONFIG AUDIO
1
Multi format signal
MUSIC LEFT HI/LO
RX COMP OUT HI
2
Audio signal (selected via ProCS)
PAX 1 and PAX 2 ICS PTT
2
Active low discrete (selected via ProCS)
PAX 1 and PAX 2 TX PTT
2
Active low discrete (selected via ProCS)
PILOT and COPILOT ICS PTT
2
Active low discrete
PILOT and COPILOT TX PTT
2
Active low discrete
POWER INPUT
1
14 to 28 Vdc power supply
RX AUDIO
11
Audio signal
RX MUTE
1
Active low discrete
1.3.2
Outputs
Name
Qty
Type
CVR
1
Audio signal
CONFIG DATA FROM JA95
1
Data signal
PHONES
7
Audio signal
Note: There are 6 outputs for driving 7 phones.
MF SW (Multifunction Switch)
2
Active low discrete (selected via ProCS)
MIC
6
Audio signal
PTT
6
Active low discrete
(PA PTT feature selected from ProCS)
RX COMP OUT
1
Audio signal (selected via ProCS)
1.3.3
Bi-directional Ports
Name
Qty
Type
ICS TIE / DIGITAL TIE
1
Audio signal (selected via ProCS)
