Fitting the vapour protection
Screw the vapour protecting strip onto the front
part of the worktop using four 3.5 x 16 screws.
Fixing to the adjacent units
To prevent the dishwasher tilting, it must be
secured to either the worktop or adjacent kitchen
cabinet/wall using the brackets supplied. Insert the
two fixing brackets into the slots provided in the top
front part of the dishwasher as shown in the figure.
Secure the brackets to adjacent units with the 3.5 x 16
screws using the upper or the side holes.
The appliance must be secured to the
underside of the worktop using the brackets
provided.
Failure to do this could cause damage or
injury.
Adjusting the door balance
When the dishwasher door is correctly balanced it
will remain in position when left ajar. The door
balance may need to be adjusted when the decor
panel is fitted. Turn the screws until the correct
balance is reached:
- heavy panel - turn clockwise
- light panel - turn anticlockwise
After the adjustment of the door balance, cover the
screw holes with the two plugs supplied with the
machine.
48
PFI26GB
II47
600 mm
600 mm
II25
II54
II68
ENGLISH
Summary of Contents for JSI 5562
Page 1: ...Geschirrsp ler Dishwasher JSI 5562 Gebrauchsanweisung Instruction booklet...
Page 26: ......
Page 27: ......
