38 electrolux
INSTALLATION
Location
The appliance should be installed
well away from sources of heat such as
radiators, boilers, direct sunlight etc.
Electrical connection
Before plugging in, ensure that the
voltage and frequency shown on the
serial number plate correspond to your
domestic power supply. Voltage can
vary by ±6% of the rated voltage.
For operation with different voltages, a
suitably sized auto-transformer must be
used.
The a
appliance m
must b
be e
earthed.
The power supply cable plug is provided
with a contact for this purpose.
If the domestic power supply socket is
not earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a
specialist technician.
The
M
Manufacturer
d
declines
a
all
responsibility iif tthe a
above ssafety
precautions a
are n
not o
observed.
This appliance complies with the
following E.E.C. Directives:
- 8
87/308 E
EEC of 2/6/87 relative to radio
interference suppression.
- 7
73/23 E
EEC of 19.2.73 (Low Voltage
Directive) and subsequent
modifications;
- 8
89/336
E
EEC
of 3.5.89
(Electromagnetic Compatibility
Directive) and subsequent
modifications.
ATTENTION!
It must be possible to disconnect
the appliance from the mains power
supply; the plug must therefore be
easily accessible after installation.
CUSTOSERVICE AND
SPARE PARTS
I
f the appliance is not functioning
properly, check that:
• the plug is firmly in the wall socket
and the mains power switch is on;
• there is an electricity supply (find out
by plugging in another appliance);
• the temperature is correct .
• If your appliance is still not working
properly after making the above
checks, contact the nearest service
centre.
To obtain fast service, it is essential
that when you apply for it you specify the
model and serial number of your
appliance which can be found on the
guarantee certificate or on the rating
plate located inside the appliance, on
the bottom left-hand side.
