t
596
555
max
Li89
+
-
5. To adjust the height proceed as follows:
- Loosen or tighten the two front feet.
- The rear feet are adjusted by turning the screw in
the front kick plate to the left or right.
II52
3
1
2
B
7. The joint cover (B) is to be assembled after having
installed the appliance in the recess.
25
6. If necessary, pads are supplied for the rear feet to
make sliding the appliance in and out of the recess
easier. To fit the pads, press them onto the rear
feet.
If required, the dimensions of these pads can be
reduced by breaking them where marked.
4
115
°
5
8.
Screw appliance into place and retain the cabinet
with screws.
