18
Door reversal, panelling
instructions
Before carrying out any operation, disconnect the
appliance from the mains.
Door reversal
Proceed as follows:
1. Remove bottom hinge (4).
2. Remove door (8).
3. Remove pivot (3) from the top hinge and refit it in
the outer hole of the hinge on the opposite side.
4. Refit the door and the bottom hinge.
5. Remove handle (6) and refit it on the opposite side.
Panelling the door
1. Take off the door frame section opposite to the door
handle.
2. Loosen, without removing them, all remaining
screws securing the door frame.
3. Slide in the decor panel from the frameless side,
then fasten again the frame to the door including
the previously removed frame section.
Panel dimensions
Width
488 mm
Height
681 mm
Max. thickness
4 mm
