JUNO JKI 4035 Operating Instructions Manual Download Page 11

27

Cleaning and Maintenance

For hygienic reasons the appliance interior, including
interior accessories, should be cleaned regularly.

1

 

Warning! 

The appliance may not be connected to the mains
during cleaning. Danger of electrical shock!
Before cleaning switch the appliance off and
remove the plug from the mains, or switch off or
turn out the circuit breaker or fuse.

Never clean the appliance with a steam cleaner.
Moisture could accumulate in electrical compo-
nents, danger of electrical shock! Hot vapours can
lead to the damage of plastic parts.

Do not use defrosting sprays, they can be hazard-
ous to your health and/or contain substances that
damage plastics.

The appliance must be dry before it is placed back
into service.

Attention!

Ethereal oils and organic solvents can attack plas-
tic parts, e.g.
– lemon juice or the juice from orange peals;
– butyric acid;
– cleansers which contain acetic acid.

Do not allow such substances to come into
contact with appliance parts.

Do not use any abrasive cleansers.

1.

Remove the food from the refrigerator. Store it in a
cool place, well covered.

2.

Switch the appliance off and remove the plug from
the mains, or switch off or turn out the circuit
breaker or fuse.

3.

Remove frost from time to time with a soft plastic
scraper, e.g. a pastry scraper. Under no circum-
stances use hard or pointed objects to remove
frost.

4.

Clean the appliance and the interior accessories
with a cloth and lukewarm water. Commercially
available dish washing detergents may also be
used.

5.

After cleaning wipe with fresh water and rub dry.

6.

Check the water drain hole on the rear wall of the
fridge. Clear a blocked drain hole with the aid of
the green strip inserted into the drain hole.

7.

After everything is dry place appliance back into
service. 

Energy Saving Tips

Do not install the appliance near cookers, radia-
tors or other sources of warmth. High ambient
temperatures cause longer, more frequent opera-
tion of the compressor.

Ensure sufficient air circulation and exhaust at the
appliance base and at the back wall of the appli-
ance. Never cover air vent openings.

Do not place warm foods into the appliance. Allow
warm foods to cool first.

Only leave door open as long as necessary.

Do not set temperature any colder than neces-
sary.

Summary of Contents for JKI 4035



















Reviews: