14
If after having carried out the operation described in
section 2 there is still some space left between the ap-
pliance and the kitchen unit, fit the trimming provided
together with the appliance on the stop strip (A).
Fig. 3
Open the door and push the appliance against the
side of kitchen furniture opposite to that of appliance
hinges.
Fasten the appliance with 4 screws provided in the kit
included with the appliance. Snap vent grill (C) and
hinge cover (D) into position.
Fig. 4
D265
A
D
C
D388
Press in the joint covers between the appliance and
the kitchen furniture.
Fig. 5
Apply covers (B) on joint cover lugs and into hinge
holes.
Fig. 6
Position the runners (H) inside the kitchen unit door as
shown in Fig. 7 and mark the position of the external
holes.
After preparing the holes, screw the runners to the
kitchen unit door using 3.5x16 mm screws.
Fig. 7
D098
D339
B
D094
20mm
H
