41
PUTTING INTO OPERATION
OF THE OVEN BURNER
Abb. 7
●
Attention! When operating the oven burner the
ceiling slide must be pushed in against stop.
●
The oven burner is ignited with the door opened.
●
Turn the oven control knob to the left in porition 10,
push in against stop, and ignite the gas flowing out.
After ignition keep the control knob pushed in for
about 5 more seconds until the temperature sensor
is sufficiently heated and the flame remains stable.
Afterwards the control knob can be set to the position
desired between 1 and 10.
●
Watch the flame picture. If the flame goes out, repeat
the ignition procedure.
Models with integrated automatic ignition
●
Push in the knob for oven/electric grill, turn from the
right to the left up to highest marking and keep the
knob pushed in.
●
At the same time one pushes the button for the
electronic ignition in order to generate sparks. Keep
the knob pushed in until appearance of the flame
(one spark will be generated after each second).
●
To switch off the burner turn the knob to position
„
●
„ (OFF)
〈
Closed position (off)
1-10 Operating position of oven burner
Fig.. 8
Ignition of the oven burner
TEMPERATURE SETTING
In correspondence with the items to be baked/roasted
and after ignition turn the oven knob to the required
temperature setting from 1 to 10
10
7
6
5
4
3
2
1
9
8
FO 1079
Position
1
2
3
4
5
6
7
8
9
10
Temperature
140
°
C
150
°
C
160
°
C
180
°
C
190
°
C
200
°
C
220
°
C
230
°
C
240
°
C
260
°
C