JUNO JB096B5, User Manual, Page: 10 / 56

4. Press to confirm.
When the time ends an acoustic signal
sounds for 2 minutes.
and time setting
flash in the display. The appliance
deactivates automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions to
the off position.
Setting the END
1. Set an oven function.
2. Press again and again until starts
to flash.
3. Press or to set the hours and the
minutes for END time.
4. Press to confirm.
At the set time an acoustic signal sounds
for 2 minutes.
and time setting flash in
the display. The appliance deactivates
automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions to
the off position.
Setting the TIME DELAY
function
1. Set an oven function.
2.
Press again and again until
starts to flash.
3. Press or to set the minutes and
the hours for DURATION time.
4. Press to confirm. The display shows
flashing
.
5.
Press or to set the hours and the
minutes for END time.
6. Press to confirm.
Appliance turns on automatically later on,
works for the set DURATION time and
stops at the set END time. At the set time
an acoustic signal sounds for 2 minutes.
and time setting flash in the display. The
appliance deactivates.
7. Press any button to stop the acoustic
signal.
8. Turn the knob for the oven functions to
the off position.
Setting the MINUTE MINDER
1. Press again and again until and
" 00 " flash in the display.
2. Press or to set the MINUTE
MINDER.
First you set the seconds, then the
minutes.
When the time you set is longer than 60
minutes,
flash in the display.
3. Set the hours.
4. The MINUTE MINDER starts
automatically after 5 seconds.
After 90% of the set time, an acoustic
signal sounds.
5. When the set time ends, an acoustic
signal sounds for 2 minutes. " 00:00 "
and flash in the display. Press any
button to stop the acoustic signal.
COUNT UP TIMER
To reset the Count Up Timer, press and
hold and . The timer starts to count
up again.
USING THE ACCESSORIES
WARNING! Refer to Safety
chapters.
Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
10