Juniper XRE200 -, Hardware Manual

Page: 94 / 188

WARNING: To avoid injury, do not touch the fan with your hands or any tools as
you slide the fan module into the chassis—the fan may start running.
3. Insert the fan module into the fan module slot at a slight angle, making sure the side of the fan module
opposite the fan module latch is inserted first into the fan module slot.
4. Slide the fan module into the slot. Gently push the fan module into the slot until the fan module latch
securely latches the fan module into the slot.
Figure 33: Installing a Fan Module in an XRE200 External Routing Engine (Right Fan Module Slot Pictured)
g020966
Maintaining the XRE200 Power System
IN THIS SECTION
Removing an AC or DC Power Supply from an XRE200 External Routing Engine | 95
Installing an AC or DC Power Supply in an XRE200 External Routing Engine | 96
94