Juniper XRE200 -, Hardware Manual

Page: 61 / 188

Table 24: Cable Specifications for XRE200 External Routing Engine to XRE200 External Routing Engine
Connections
Receptacle
Maximum
Length
Cable/Wire
Supplied Cable Specification
Port on XRE200
External Routing
Engine
RJ-45
autosensing
328 feet
(100 meters)
Two 7-foot
(2.13-meter) length
with RJ-45
connectors
Category 5 cable or equivalent
suitable for 1000BASE-T
operation
Ethernet VCP
SFP port 43.5 miles
(70 km)
None 1-gigabit SFP module connector
for 1000BASE-X Gigabit
Ethernet SFP module port
SFP VCP
SEE ALSO
Configuring a Long-Distance Virtual Chassis Port Connection for an EX8200 Virtual Chassis
Cables Connecting the XRE200 External Routing Engine to Management
Devices
Table 25 on page 61 lists the specifications for cables that connect the XRE200 External Routing Engine
to a management device.
Table 25: Cable Specifications for Connections Between External Routing Engines and Management
Devices
External
Routing Engine
Receptacle
Maximum
Length Cable/Wire Supplied Cable Specification
Port on External
Routing Engine
RJ-45 6 feet
(1.83 meters)
One 7-foot (2.13-meter)
length with RJ-45/DB-9
connectors
RS-232 (EIA-232)
serial cable
Console (CON) port
(9600 baud)
RJ-45
autosensing
328 feet
(100 meters)
One 7-foot (2.13-meter)
length with RJ-45
connectors
Category 5 cable or
equivalent suitable for
1000Base-T operation
Management (MGMT)
Ethernet port
(10/100/1000)
61