Juniper WLA Series, Hardware Documentation

Page: 44 / 92

Table 10: 2.4-GHz Radio Receive Sensitivities
2.4-GHz Radio Receive Sensitivities (in dBm)
HT-20 Legacy "g" Legacy "b" Legacy "a"
MCS23 MCS16 MCS15 MCS8 MCS7 MCS0 54
Mbps 6
Mbps 11
Mbps 1
Mbps 54
Mbps 6
Mbps
-71 -93 -71 -93 -71 -93 -77 -93 -88 -95 -75 -91
Related
Documentation
Requirements and Specifications for 5-GHz Radios on a WLA532E Access Point on
page 32
•
•
WLA Series Access Point Radio Frequency Exposure Guidelines on page 37
•
WLA532E Antenna Models on page 7
Requirements and Specifications for 5-GHz Radios on a WLA532E Access Point
The 5-GHz band radio is operational from channels 36 through 165 in legacy IEEE standard
802.11n 3x3 or IEEE 802.11n 3x3 from single to three spatial streams of 20 MHz and 40
MHz channel modes. At an MCS0 data rate, it provides 16 dBm transmit power per chain
and has a receive sensitivity of -88 dBm. At an MCS23 data rate, it provides 10 dBm
transmit power per chain and has a receive sensitivity of -65 dBm. The 5-GHz radio
consumes maximum power rate of 4.25W.
Each antenna connector on the WLA532E can support any external single or dual band
elements. The access point has been designed to maximize isolation between all
antennas. For 5-GHz and 2.4-GHz concurrent operation, the antenna can support a
co-band isolation of -15dB at 2.4GHz and -30dB at 5GHz.
Table 2 on page 7 lists the supported antenna models.
Table 11: WLA532E Antenna Models
Vertical BW Horizontal BW Gain Type
Juniper Model
Number
5GHz 2.4GHZ 5GHz 2.4GHZ 5GHz 2.4GHZ
60° 60° 360° 360° 4dBi 3dBi Omni (Paddle)
Non-Plenum WLA-ANT-7360P-IN
15° 22° 360° 360° 8dBi 6dBi Omni ANT-7360A-OUT
60° 70° 55° 75° 10.7dBi 8dBi Panel ANT-77555-OUT
Copyright © 2012, Juniper Networks, Inc. 32
WLA532E Access Point Hardware Documentation