Juniper WLA Series Hardware Documentation Download

Page: 37 / 92

•

CAN/CSA-C22.2 No. 60950-1 Information Technology Equipment

•

UL 60950-1 (2nd Ed.) Information Technology Equipment

•

EN 60950-1 Information Technology Equipment

•

IEC 60950-1 Information Technology Equipment - Safety (All country deviations)

•

EN 60601-1-1 General Safety for medical electrical systems

•

ETSI EN 300 019-1-2 Class 2.3 Environmental Conditions and Environmental Tests for
Telecommunications Equipment

•

IEC 60601-1 3rd edition

•

IEC 60068-2-41

•

IEC 60068-2-6

•

Low Voltage Directive 2006/95/EEC

Documentation

General Safety Guidelines and Warnings on page 23

•

WLA Series Access Point Radio Frequency Exposure Guidelines on page 37

Medical Safety Compliance for WLA Series Access Points

This topic applies to all hardware devices in the Juniper Networks WLA Series Wireless
LAN Access Point family.

NOTE:

No maintenance is required for the WLA Series Wireless LAN Access

Point hardware products. However, if external cleaning is needed, use a dry
cloth only to lightly wipe device.

NOTE:

No hardware modification is allowed.

NOTE:

The expected service life of the WLA321, WLA322, WLA532, and

WLA532E access points is 10 years. For the expected service life of your unit
and whether an extended end of life warranty option was purchased, see
your service contract.

NOTE:

The system must be in compliance with IEC60601-1 clause 16 when

you are connecting external accessories.

Documentation

General Safety Guidelines and Warnings on page 23

•

No User Serviceable Parts Warning on page 26

Chapter 4: Safety Standards and Guidelines

Summary of Contents for WLA Series










































































Search results

Summary of Contents for WLA Series

Reviews:

Related manuals for WLA Series

Brands by name

Popular brands

Juniper WLA Series, Hardware Documentation

Search results

Summary of Contents for WLA Series

Reviews:

Related manuals for WLA Series

Brands by name

Popular brands