Juniper SSR1300, Hardware Manual

Page: 14 / 87

Table 4: LEDs on the Ethernet Ports
Callout LED Description
1 Link Activity (LED on the left)
•
Blinking amber—Link is
established and there is activity
on the port.
•
Solid amber—Link is established
but there is no activity on the
port.
•
Off—There is no link
established.
2 Speed (LED on the right)
•
Solid amber—The link is
operating at 1 Gbps speed.
•
Solid green—The link is
operating at 100 Mbps speed.
•
Off—The link is operating at 10
Mbps speed.
Figure 6 on page 8 shows the location of the LEDs on the 1/10G SFP+ ports and Table 5 on page 9
describes the LEDs.
Figure 6: LEDs on the 1/10G SFP+ Ports
8