•
Graceful shutdown—You can do a graceful shutdown in two ways:
•
Use the Linux poweroff command at the Console. The appliance begins gracefully shutting down the
operating system and then powers itself off.
•
Press and hold the POWER button for 3 seconds, then release. The appliance begins gracefully shutting
down the operating system and then powers itself off.
CAUTION:
Use the graceful shutdown method to power off or reboot the appliance.
•
Forced shutdown—Press and hold the POWER button for 7 seconds, then release. The appliance
immediately powers itself off without shutting down the operating system.
CAUTION:
Forced shutdown can result in data loss and corruption of the file system.
Use the forced shutdown method as a last resort to recover appliance if the appliance
operating system is not responding to the graceful shutdown method.
WARNING:
Do not press the POWER button while the appliance is shutting down.
To remove power completely from the appliance, unplug the power cord or switch off the power source.
After powering off a power supply, wait at least 10 seconds before turning it back on. After powering on
a power supply, wait at least 10 seconds before turning it off.
Connect SSR120 to External Devices
IN THIS SECTION
Connect SSR120 to a Management Console | 39
38
Summary of Contents for SSR120
