Juniper SSG140, Hardware Installation And Configuration Manual, Page: 26 / 60

SSG 140 Series Hardware Installation and Configuration Guide
26 „
Basic Device Configuration
Basic Device Configuration
The following sections describe the basic configuration tasks required to place the
SSG 140 device in operation.
„ “Admin Name and Password” on page 26
„
“Administrative Access” on page 27
„ “Interface IP Address” on page 27
„ “Management Services” on page 27
„ “Hostname and Domain Name” on page 28
„
“Domain Name System Server” on page 28
„ “Date and Time” on page 28
„ “Default Route” on page 29
„ “Bridge Group Interfaces” on page 29
The examples in this section demonstrate how to establish initial network
connectivity. For advanced configuration information, refer to the
Concepts &
Examples ScreenOS Reference Guide .
Admin Name and Password
The administrative user has complete privileges to configure a device. We
recommend that you change the default admin name and password (both
netscreen
) immediately.
To change the admin name and password:
WebUI
Configuration > Admin > Administrators > Edit (for the NetScreen
Administrator Name): Enter the following, then click
OK :
Administrator Name:
Old Password: netscreen
New Password:
Confirm New Password:
CLI
set admin name
name
set admin password pswd_str
save