Juniper SRX5600, Hardware Manual

Page: 152 / 483

Approximately 1.6 lb (0.7 kg) Weight
OK/FAIL LED, one bicolor:
•
Steady green–The port module is operating normally.
•
Red–The port module has failed and is not operating normally.
•
Off–The port module is powered down.
LINK LED, single color, one per port:
•
Steady green–The link is active.
•
Off–No link.
TX/RX LED, single color, one per port:
•
Blinking green–The port is receiving or transmitting data.
•
Off–No activity.
LEDs
The serial number label is located as shown in Figure 79 on page 153 .
Figure 79: Port Module SRX-IOC-16GE-TX Serial Number Label
g030305
JX0123
Serial number
ID label
Serial Number Location
Flex I/O Card Port Module SRX-IOC-4XGE-XFP Specifications
You use port modules and Flex I/O Cards (Flex IOCs) to add different combinations of small form-factor
pluggable transceiver (SFP), 10-gigabit SFP transceiver (XFP), and copper ports to your services gateway
to suit the specific needs of your network. The SRX-IOC-4XGE-XFP port module ( Figure 80 on page 154 )
installs into a Flex IOC to add four 10-Gigabit Ethernet XFP ports.
153