Juniper SRX550, Hardware Manual

Page: 38 / 220

RELATED DOCUMENTATION
SRX550 Services Gateway Front Panel | 15
SRX550 Services Gateway Chassis | 14
SRX550 Services Gateway Back Panel | 22
SRX550 Services Gateway Back Panel
Figure 5 on page 22 shows the back panel of the SRX550 Services Gateway.
Figure 5: SRX550 Services Gateway Back Panel
g034101
7 5 4 3 6
2 1
Table 8 on page 22 describes the components on the back panel of the SRX550 Services Gateway with
reference to Figure 5 on page 22 .
Table 8: SRX550 Services Gateway Back Panel Components
Usage Description Location Component Number
Power supplies are
hot-swappable and support
single- or dual-redundant
power supply versions.
If you need to power off
the services gateway after
it finishes booting, first use
the CLI to halt the device.
The power supply provides
power to the services
gateway and its components.
When the services gateway
is equipped with the two
power supply option, they
work together to provide
redundancy and load-sharing.
The following power supplies
are available:
•
645 W AC power supply
with PoE power
•
645 W DC power supply
with PoE power
Left side of
back panel
Two power supply
slots. Each power
supply contains a
power cord outlet.
One 645 W AC
power supply is
provided with the
services gateway.
1
22