Juniper SRX550, Hardware Manual

Page: 118 / 220

•
Establish basic connectivity.
•
Obtain an SSL certificate from a trusted signing authority.
For more details about configuring secure web access on your services gateway, see the Initial Configuration
for Security Devices .
RELATED DOCUMENTATION
SRX550 Services Gateway Basic Connectivity Overview | 95
Configuring Basic Settings for the SRX550 Services Gateway with a Configuration Editor | 110
Connecting to the SRX550 Services Gateway from the CLI Locally
To use the CLI to configure the SRX550 Services Gateway, you must connect through the console port,
as shown in Figure 27 on page 102 .
Figure 27: Connecting to the Console Port on the SRX550 Services Gateway
g034114
NOTE: Figure 27 on page 102 shows a connection to a local management device. A remote
connection to the services gateway through a modem requires the cable and connector shown
(RJ-45 to a DB-9 serial port adapter), along with an adapter for your modem, which you must
purchase separately.
102