Juniper SRX4100, Hardware Manual

Page: 55 / 134

CHAPTER 9
Unpacking the Services Gateway
• Unpacking the SRX4100 Services Gateway on page 39
• Verifying Parts Received with the SRX4100 Services Gateway on page 40
Unpacking the SRX4100 Services Gateway
The services gateway is shipped in a cardboard carton, secured with foam packing
material. The carton also contains an accessory box and quick-start instructions.
CAUTION: The services gateway is maximally protected inside the cardboard
carton. Do not unpack it until you are ready to begin installation.
To unpack the services gateway:
1.
Move the cardboard carton to a staging area as close to the installation site as possible,
where you have enough room to remove the components from the chassis.
2.
Open the carton.
3.
Pull out the packing material holding the services gateway in place.
4.
Verify the parts received against the inventory (packing list). The packing list specifies
the part numbers and carries a brief description of each part in your order.
5.
Save the shipping carton and packing materials in case you need to move or ship the
services gateway at a later time.
Related
Documentation
Verifying Parts Received with the SRX4100 Services Gateway on page 40
•
•
SRX4100 Services Gateway Installation Overview on page 41
39 Copyright © 2017, Juniper Networks, Inc.