Juniper SRX1500 Hardware Manual Download Page 69

Page: 69 / 168

CHAPTER 13

Installing the SRX1500 Services Gateway
into a Rack

•

Installing the SRX1500 Services Gateway in a Rack on page 51

•

Installing an AC Power Supply on the SRX1500 Services Gateway on page 53

•

Installing a DC Power Supply on the SRX1500 Services Gateway on page 54

Installing the SRX1500 Services Gateway in a Rack

You can front-mount the SRX1500 Services Gateway in a rack. Many types of racks are
acceptable, including four-post (telco) racks, enclosed cabinets, and open-frame racks.

NOTE:

If you are installing multiple devices in one rack, install the lowest one

first and proceed upward in the rack.

To install the services gateway in a rack:

Position a mounting bracket on each side of the chassis.

Use a number 2 Phillips screwdriver to install the screws that secure the mounting
brackets to the chassis.

Figure 8: Installing the Mounting Brackets on the SRX1500 Services
Gateway

Have one person grasp the sides of the services gateway, lift it, and position it in the
rack.

Summary of Contents for SRX1500
















































































































































Search results

Summary of Contents for SRX1500

Reviews:

Juniper SRX1500, Hardware Manual, Page: 69 / 168

Search results

Summary of Contents for SRX1500

Reviews: