Juniper SRX1500 Hardware Manual Download Page 124

Page: 124 / 168

•

Listing the SRX1500 Services Gateway Component Details with the CLI on page 107

•

Information You Might Need to Supply to JTAC on page 108

Returning a SRX1500 Services Gateway Component to Juniper Networks

To return an SRX1500 Services Gateway or component to Juniper Networks for repair or
replacement:

Determine the part number and serial number of the services gateway or component.

Obtain a Return Materials Authorization (RMA) number from JTAC.

NOTE:

Do not return the services gateway or any component to Juniper

Networks unless you have first obtained an RMA number. Juniper Networks
reserves the right to refuse shipments that do not have an RMA. Refused
shipments are returned to the customer via collect freight.

Pack the SRX1500 Services Gateway or component for shipping.

For more information about return and repair policies, see the customer support webpage
at

http://www.juniper.net/support/guidelines.html

For product problems or technical support issues, open a support case using the Case
Manager link at

http://www.juniper.net/support/

or call 1-888-314-JTAC (within the United

States) or 1-408-745-9500 (outside the United States).

Documentation

Contacting Customer Support on page 105

•

Locating the SRX1500 Services Gateway Chassis Serial Number and Agency Labels
on page 106

•

Listing the SRX1500 Services Gateway Component Details with the CLI on page 107

•

Information You Might Need to Supply to JTAC on page 108

Locating the SRX1500 Services Gateway Chassis Serial Number and Agency Labels

The chassis serial number is located on the side of the chassis.

Documentation

Contacting Customer Support on page 105

•

Returning a SRX1500 Services Gateway Component to Juniper Networks on page 106

•

Listing the SRX1500 Services Gateway Component Details with the CLI on page 107

•

Information You Might Need to Supply to JTAC on page 108

106

SRX1500 Services Gateway Hardware Guide

Summary of Contents for SRX1500
















































































































































Search results

Summary of Contents for SRX1500

Reviews:

Related manuals for SRX1500

Brands by name

Popular brands

Juniper SRX1500, Hardware Manual

Search results

Summary of Contents for SRX1500

Reviews:

Related manuals for SRX1500

Brands by name

Popular brands