Juniper SRX 5800, Hardware Manual

Page: 41 / 536

node0:
--------------------------------------------------------------------------
FPC 1 already online
The command output indicates the MPC is online.
Confirm that the MPC in the chassis is online:
user@host>
show chassis fpc
node0:
--------------------------------------------------------------------------
Temp CPU Utilization (%) Memory Utilization (%)
Slot State (C) Total Interrupt DRAM (MB) Heap Buffer
0 Online 37 6 0 2048 19 14
1 Online 44 11 0 1024 23 29
2 Online 49 22 0 1024 14 25
SRX5800 Services Gateway Craft Interface Alarm Relay Contacts
The craft interface has two alarm relay contacts for connecting the device to external alarm devices (see
Figure 7 on page 42 ). Whenever a system condition triggers either the major or minor alarm on the craft
interface, the alarm relay contacts are also activated. The alarm relay contacts are located on the upper
right of the craft interface.
Figure 7: Alarm Relay Contacts
The alarm relay contacts consist of two sets of connectors, one set for each of the two alarms (major and
minor). For each alarm color there are three connectors. Table 10 on page 43 describes the functions of
the connectors.
42