Juniper SRX 5800, Hardware Manual

Page: 400 / 536

Figure 154: Removing the Cable Manager
Installing the SRX5800 Services Gateway Cable Manager
Before you begin installing the standard cable manager:
•
Ensure you understand how to prevent electrostatic discharge (ESD) damage. See “Prevention of
Electrostatic Discharge Damage” on page 505 .
Ensure that you have the following available:
•
ESD grounding strap
•
7/16 in. (11 mm) nut driver
To install the cable manager (see Figure 155 on page 402 ):
1. Attach an ESD grounding strap to your bare wrist, and connect the strap to one of the ESD points on
the chassis.
2. Position the standard cable manager on the studs on the lower front of the chassis.
401