Juniper QFX5110, Hardware Manual

Page: 41 / 222

QFX5110 Chassis Status LEDs
The QFX5110 switch series has four status LEDs on the FRU side of the chassis, next to
the management ports (see
Figure 8 on page 21 ).
Figure 8: Chassis Status LEDs on a QFX5110 Switch
4— 1— USB port Status LEDs
5— 2— em1–SFP management Ethernet port (C1)
cage (socket for either 10/100/1000 BASE-T
RJ-45 SFP or 1-GbE fiber SFP) em0–RJ-45 (10/100/1000 BASE-T)
management Ethernet port (C0)
3—RJ-45 console port (CON)
Table 11 on page 22 describes the chassis status LEDs on a QFX5110, their colors and
states, and the status they indicate. You can view the colors of the three LEDs remotely
through the CLI by issuing the operational mode command
show chassis lcd
.
21 Copyright © 2017, Juniper Networks, Inc.
Chapter 2: Chassis Components and Descriptions