Juniper QFX5110, Hardware Manual

Page: 115 / 222

To connect the device to a management console (see Figure 34 on page 95 and
Figure 35 on page 95 ):
1.
Connect one end of the Ethernet cable to the console port (labeled
CON
,
CONSOLE
,
or
CON1
) on the device.
2.
Connect the other end of the Ethernet cable to the console server (see
Figure 34 on page 95 ) or management console (see Figure 35 on page 95 ).
Figure 34: Connecting a Device to a Management Console Through a
Console Server
g020547
CON
To Console
port Console server PC
Figure 35: Connecting a Device Directly to a Management Console
Related
Documentation
Connecting a Device to a Network for Out-of-Band Management on page 93
•
Connecting QFX5110 and QFX5100 Members in a QFX5110 Virtual Chassis
QFX5110 Virtual Chassis are cabled in a ring topology. Each Virtual Chassis has a master,
a backup, and up to 8 additional switches participating as members of the Virtual Chassis.
Select models of QFX5100 are allowed as line cards in a QFX5110 Virtual Chassis. For
sample cabling diagrams, see
Figure 36 on page 96 and Figure 37 on page 96
95 Copyright © 2017, Juniper Networks, Inc.
Chapter 11: Connecting the Switch to the Network