Juniper QFX5100, Hardware Manual

Page: 181 / 256

•
QFX5100-24Q only: If you ordered the optional high-speed uplink modules, they
are packaged as components and must be installed in the switch.
7.
Save the shipping carton and packing materials in case you need to move or ship the
switch later.
Table 41: Inventory of Components Supplied with a QFX5100 Switch
Quantity Component
1 Chassis with five fan modules and two power supplies. The QFX5100-96S has three fan modules.
2 Rear mounting blades
2 Front mounting brackets
2 Extension brackets
1 RJ-45 cable and RJ-45 to DB-9 adapter
Related
Documentation
Mounting a QFX5100 Switch in a Rack or Cabinet on page 163
•
•
Installing and Connecting a QFX5100 Switch on page 161
Mounting a QFX5100 Switch in a Rack or Cabinet
You can mount all models of the QFX5100 switch on a four post 19-in. rack or cabinet
using the mounting kit provided with the device.
For four post rack or cabinet installations, the mounting kit contains two front mounting
rails with two matching rear mounting blades. This configuration allows either end of the
switch to be mounted flush with the rack and still be adjustable for racks with different
depths.
The mounting kit for the QFX5100-96S has mounting rails, blades, and brackets for the
four-post configuration.
(The remainder of this topic uses “rack” to mean “rack or cabinet.”) The front and rear
rack rails must be spaced between 28 in. (71.1 cm) and 36 in. (91.4 cm) front to back.
This topic describes:
•
Before You Begin Rack Installation on page 164
• Four Post Procedure on page 165
163 Copyright © 2014, Juniper Networks, Inc.
Chapter 16: Installing the QFX5100 Device