Juniper QFX10016, Hardware Manual

Page: 35 / 439

QFX10000 Chassis
IN THIS SECTION
QFX10000 Field-Replaceable Units | 24
QFX10000 Status Panel | 26
QFX10000 EMI Front Panel | 29
QFX10000 Optional Equipment | 30
QFX10000 Field-Replaceable Units
Field-replaceable units (FRUs) are switch components that you can replace at your site. The switch uses
these types of FRUs:
• Hot-insertable and hot-removable—You can remove and replace these components without powering
off the switch or disrupting the switching function.
• Hot-pluggable—You can remove and replace these components without powering off the switch, but
the switching function is interrupted until you replace the component.
Table 5 on page 24 lists the FRUs and their types for the QFX10000.
Table 5: FRUs in an QFX10000
FRU Type
Power supplies Hot-insertable and hot-removable.
Fan tray Hot-insertable and hot-removable.
Fan tray controller Hot-insertable and hot-removable.
24